Bruder Rear Hydraulic Arm with Grab: How to Attach and Use It
By Bruder Toy Shop | Published: 2026-11-04
Category: ハウツーガイド
Learn how to attach the Bruder 02338 rear hydraulic arm with grab to your Profi series tractor, swap the bucket for the grapple, and set up stable digging and loading play.
Quick answer
Mount the Bruder 02338 rear hydraulic arm with grab on the rear hitch of any Profi series tractor, unfold the support legs, and swap the bucket for the grapple when you want to load loose material. The arm is fully functional, so you can raise, lower, and scoop just like the real machine.
Why the support legs matter for stable play
The fold-out support legs are the difference between a wobbly toy and a realistic digging setup. When the arm is extended and loaded, the legs take the weight off the tractor’s rear tires and keep the whole rig from tipping. Always fold them down before you start lifting or dragging material—especially on carpet or uneven surfaces where the tractor can slide.
When to use the bucket vs. the grapple
The rear excavator comes with a bucket, but you can convert it into a rear grapple by replacing the bucket with the included grab. Use the bucket for scooping and carrying loose material like play sand or small gravel; switch to the grapple when you need to pick up logs, sticks, or larger debris. The swap is tool-free and takes seconds, so you can change attachments as your play scenario changes.
Step-by-step: attach and use the rear hydraulic arm
- Check the tractor’s rear hitch: Confirm your tractor is part of the Profi series and that the rear hitch is clear of other attachments. Remove any existing rear implement before mounting the arm. A clean hitch prevents misalignment and makes the next step easier.
- Align and slide the arm onto the hitch: Hold the arm level and slide its mounting bracket onto the tractor’s rear hitch until it clicks or seats firmly. Do not force it—if it won’t slide on, check for debris or a misaligned bracket. A properly seated arm should not wobble when you gently lift the boom.
- Fold out the support legs: Rotate the two support legs down until they lock into place. Make sure both legs touch the ground evenly before you put any weight on the arm. Skipping this step is the most common cause of tipping during play.
- Choose your attachment: bucket or grapple: For scooping, leave the bucket installed. To convert to a grapple, pull the bucket straight off its mount and push the grab onto the same mount until it locks. No tools are needed. Test the attachment by gently tugging it—it should stay firmly in place.
- Test the arm’s movement: Raise and lower the boom, and open and close the grab (or tilt the bucket) through a full range of motion. Check that the arm moves freely and the legs stay planted. If the arm binds, recheck the hitch connection and leg position before applying force.
- Start digging or loading: Position the tractor close to your material pile, lower the arm, and scoop or grab. For loading, swing the arm over a trailer or truck bed and release the grab. Keep the load small enough that the tractor stays stable. Overloading the grab can strain the arm—if the front wheels lift, reduce the load.
Product facts
- Bruder 02338 Rear Hydraulic Arm with Grab 6.6.8: The rear excavator with grapple is fully functional and can be converted into a rear grapple by replacing the bucket. You get two tools in one—scoop with the bucket, then switch to the grapple for grabbing and loading without needing a second attachment.
Bruder 02338 Rear Hydraulic Arm with Grab 6.6.8 - Bruder 02338 Rear Hydraulic Arm with Grab 6.6.8: The fold-out support legs provide secure support. Folding the legs down before lifting keeps the tractor stable and prevents tipping during digging or loading play.
- Bruder 02338 Rear Hydraulic Arm with Grab 6.6.8: The rear excavator with grapple is compatible with all tractors in the Profi series. If you already own a Profi series tractor, this arm attaches directly—no adapters or modifications needed.
