Fixing Loose Parts on Bruder Construction Vehicles: A Parent's Guide
By Bruder Toy Shop | Published: 2026-10-28
Category: Tips & Care
Learn how to diagnose and fix loose parts on Bruder construction vehicles, from wheels to trailer couplings, with practical steps for safe play.
Quick answer
Check the specific joint or wheel, tighten visible screws, and apply gentle pressure to snap parts back; if the axle or coupling is cracked, replace the part or contact Bruder support.
Why parts loosen over time
Bruder construction vehicles are designed for realistic play, which means moving parts like wheels, trailer hitches, and loader arms see repeated stress. Over months of use, screws can back out slightly, plastic clips can wear, and snap-fit connections may lose their grip. This is normal and usually fixable without special tools.
When to stop and get a replacement
If a part is cracked, the axle hole is stretched, or the plastic is broken, tightening or re-snapping won't hold. In those cases, the safest fix is to order a replacement part from Bruder or a certified retailer. For example, the Bruder 02774 Man TGA Low Loader's functional turntable coupling is a precision piece—if it snaps, a DIY glue fix may impair rotation and should be avoided.
Diagnose and fix loose parts
- Symptom: Wheel wobbles or falls off: Check if the axle pin is still present. If it is, push the wheel back on and ensure the clip or cap is seated. If the axle is missing, the wheel will not stay on. If the axle is missing, stop and order a replacement axle kit.
- Symptom: Trailer hitch or coupling won't stay connected: Inspect the coupling for cracks. If intact, press the two halves together firmly until you hear a click. For the Man TGA low loader's turntable, tighten the small screw on the underside with a Phillips #1 screwdriver. If the coupling is cracked, do not glue it; order a new coupling part.
- Symptom: Loader arm or bucket droops: Look for a loose pivot screw. Tighten it with a screwdriver, but do not overtighten—the arm should still move freely. If the plastic hole is worn, the arm will not stay up. If the hole is worn, the arm needs a replacement part; temporary fix with a small rubber band is not recommended for safety.
Product reference
- Bruder 02774 Man TGA Low Loader with Manitou Telehandler 35.12.9: The Man TGA low-loader features a fully functional turntable coupling and folding trailer. If the coupling loosens, it can fail to rotate smoothly; tightening the screw underneath restores function without disassembly.
Bruder 02774 Man TGA Low Loader with Manitou Telehandler 35.12.9
