Bruder Toy Shop

Bruder 62731 Police Motorcycle Care: Fix Common Problems

Bruder 62731 Police Motorcycle Care: Fix Common Problems

By Bruder Toy Shop | Published: 2026-10-17

Category: Tips & Care

Solve the most common Bruder 62731 Scrambler Ducati Police Motorcycle issues with practical cleaning, storage, and parts-care steps.

Quick answer

Most Bruder 62731 Scrambler Ducati Police Motorcycle problems come from dust in moving parts, stickers lifting at the edges, or figures stored under pressure. Clean with a soft brush and mild soap, dry fully, and store the bike upright with the kickstand down and no heavy items on top. If a wheel or steering part is cracked or missing, stop playing and replace the part rather than gluing it.

Clean the motorcycle without damaging decals or moving parts

Dust and grit are the main causes of stiff wheels and scratched bodywork on the Bruder 62731 Scrambler Ducati Police Motorcycle. Brush loose dirt off with a soft paintbrush or dry toothbrush, working around the wheel arches and the steering head. For sticky residue, wipe with a cloth dampened in mild dish soap and water, then dry immediately with a microfiber cloth. Avoid soaking the model or using alcohol-based cleaners, which can dull plastic and lift sticker edges.

Store the bike so the kickstand and mirrors keep their shape

The Bruder 62731 Scrambler Ducati Police Motorcycle is part of the bworld line, so it is designed to be posed with figures. Store it upright on its kickstand on a flat shelf, or lie it on its side with a soft cloth underneath if shelf space is tight. Do not stack other toys on top, and keep it out of direct sunlight, which can fade stickers and make plastic brittle over time. A small lidded bin with a desiccant packet works well for long-term storage.

Match the police figure to the bike for steady play

The Bruder 62731 Scrambler Ducati Police Motorcycle pairs naturally with Bruder police figures, but not every figure sits the same way. The Bruder 60051 Police Officer with Dark Skin Tone and Accessories is listed at 4.2 inches, and the Bruder 60431 Female Police Officer with Dark Skin Tone and Accessories is part of the same bworld range. Check that the figure's hips and knees bend freely before forcing a seated pose; if a joint feels tight, warm the figure in your hands for a minute rather than pushing harder.

Troubleshooting guide: symptom, cause, fix, and when to stop

  • Wheels roll stiffly or squeak: Dust or carpet fibers have wrapped around the axle. Remove the wheel if the design allows, pick out debris with tweezers, and brush the axle clean. Do not lubricate with oil, which attracts more grit. If the wheel still binds after cleaning, a bent axle is likely; stop using it and replace the wheel rather than forcing it.
  • Stickers peel at the edges: Repeated handling or water exposure lifts the adhesive. Press the edge down with a clean, dry cloth and keep the model away from damp play areas. Do not use superglue, which can cloud the plastic. If the sticker is torn or lost, leave it off or replace it with a Bruder-compatible decal; a glued edge will fail again.
  • Figure will not sit securely on the seat: The figure's hip or knee joints may be stiff, or the seated pose is being forced. Bend the joints gently before placing the figure, and check that the feet reach the pegs without strain. If the figure still tips, use a small piece of removable putty under the figure for display only; do not modify the bike or figure.

Product facts for your setup

Shop Related Products

Bruder 60051 Police Officer with Dark Skin Tone and Accessories 6.6.6

Bruder 60051 Police Officer with Dark Skin Tone and Accessories 6.6.6

$11.03 $15.99

Shop Now
Bruder 60431 Female Police Officer with Dark Skin Tone and Accessories 6.6.6

Bruder 60431 Female Police Officer with Dark Skin Tone and Accessories 6.6.6

$9.59 $15.99

Shop Now
Bruder 62731 bworld Scrambler Ducati Police Motorcycle 6.6.8

Bruder 62731 bworld Scrambler Ducati Police Motorcycle 6.6.8

$24.77 $35.90

Shop Now