Bruder 60420 Snowboarder Care and Storage: Figure Set Maintenance Questions Answered

Quick Answer

Wipe the Bruder 60420 Snowboarder figure and board with a damp cloth, dry every part completely, and store the set in a lidded bin away from direct sun and heat. Check the bindings and board edges after each outdoor session, and keep small accessories in a zip bag so nothing goes missing between play days.

The Bruder 60420 Snowboarder set is a figure with winter gear, so it collects dust, sand, and moisture in ways a plain truck never does. The good news: the care routine is short once you know which parts need attention and which ones you should leave alone.

Below are the questions readers send us most often about keeping this figure set clean, dry, and ready for the next pretend run.

How should I clean the snowboarder figure without damaging it?

Start with a soft, damp cloth and a drop of mild dish soap for the figure's body and clothing. Wipe in one direction rather than scrubbing, and avoid soaking the joints, since water trapped in a moving part is the main cause of stiffness later. Rinse the cloth, wipe again with plain water, then dry with a towel.

For the snowboard itself, a damp cloth handles dust and fingerprints. Skip alcohol, acetone, or abrasive cleaners, which can dull the printed graphics. If sand or grit is stuck in the binding area, use a dry soft toothbrush first, then wipe.

• Never put the figure or board in a dishwasher or washing machine.
• Dry every crevice with a towel before storing; air-drying alone can leave moisture in joints.

What is the best way to store the figure set between play sessions?

Use a lidded plastic bin large enough that the board lies flat and the figure is not bent or pressed. A shoebox works for short-term storage, but a clear bin lets you confirm at a glance that all accessories are inside. Keep the bin out of direct sunlight and away from radiators, since heat is harder on plastic than cold.

If you keep the original packaging, store the figure and board separately inside it rather than forcing everything into one molded slot. Loose accessories such as gloves or a hat belong in a small zip bag inside the bin so they do not migrate to the bottom of a toy chest.

• Label the bin if you store multiple Bruder figure sets together.
• Avoid stacking heavy vehicles directly on top of the figure.

Do I need to dry the set after outdoor play in snow or sand?

Yes, and it matters more than most parents expect. Snow, slush, and wet sand all leave residue that hardens in joints and binding clips. When you come inside, shake off loose material, wipe the figure and board with a dry towel, and let both sit at room temperature for an hour before they go back in the bin.

Do not use a hair dryer or place parts on a heater to speed drying. Rapid heat can warp thin plastic sections like the board tip or binding straps. Room-temperature air is slower but safer.

• A quick towel dry beats a long air dry for preventing water spots.
• If the figure was in salt water, wipe with a barely damp cloth first, then dry.

How do I keep the snowboard bindings and small parts from getting lost?

Bindings, boots, and any removable straps are the first things to disappear. Establish one home for the set, and return every piece to that bin at the end of a play session rather than leaving parts on a shelf or floor. A small mesh bag inside the bin keeps tiny pieces visible and contained.

If a binding feels loose, check that it is seated correctly before tightening anything. Most Bruder figure accessories are designed to snap or slide into place, and forcing a misaligned part is what causes cracks. When in doubt, remove the piece and reseat it rather than pushing harder.

• Photograph the complete set once so you can spot what is missing later.
• Keep spare small parts in a labeled bag, not loose in a drawer.

Can I use the snowboarder figure with other Bruder sets?

Yes. Bruder figures are sized to work alongside vehicles and playsets, so the snowboarder can ride in a truck bed, stand near a farm scene, or join other figures. That flexibility is also why storage matters: a figure that lives in a shared bin with vehicles is more likely to lose accessories than one kept in its own container.

If you rotate figures between sets, do a quick parts check when you swap. Counting the board, bindings, and any loose gear takes seconds and saves a hunt later.

• Pair the figure with a vehicle that has an open bed or cargo area for easy transport play.
• Return the figure to its own bin after cross-set play.

Snowboarder Figure Care Checklist

After every outdoor session

Shake off snow, sand, or grit, wipe the figure and board with a dry towel, and let both sit at room temperature for an hour before storage. Skipping this step is the fastest way to stiff joints and cloudy board graphics.

Monthly deep clean

Wipe the figure and board with a damp cloth and a drop of mild soap, rinse with a clean damp cloth, and dry completely, including binding areas. Set a recurring reminder so cleaning does not get postponed indefinitely.

Storage setup

Use a lidded bin out of direct sun and heat, lay the board flat, and keep small accessories in a zip bag inside the bin. A clear bin makes it obvious when a piece is missing before it is lost for good.

Product Facts That Affect Care

• Bruder 60007 Man with Light Skin Tone and Brown Pants 6.6.6: 4.2 inch figure height A figure this size fits standard Bruder vehicles and playsets, so it stores easily in a small labeled bin without bending.
• Bruder 02345 4 Round Wrapped and Unwrapped Hay Bales 10.7.7: Includes two wrapped (white) and two unwrapped (ochre brown) round bales, sized for the bale wrapper and Claas Rollant 250 Straw Baler (item no. 02121) or Bale Wrapper (item no. 02122) Small accessory pieces like these are exactly what go missing in a shared toy bin, so a zip bag inside the storage container keeps them paired with the right set.

The Bruder 60420 Snowboarder set holds up well with a simple routine: wipe, dry fully, and store in one labeled place. Do that, and the figure, board, and bindings stay ready for the next snowy pretend run without cracks, stiffness, or missing parts.